My avatar .... a E 10 Hetzer

Koncepty, prototypy, WOT, Panzerwaffe 46 atp.
Odpovědět
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

My avatar .... a E 10 Hetzer

Příspěvek od Edwin »

Some time ago, I once failed an E 10 Plastic in hand with the request to get if I can get him operability. After I had succeeded, I now have built my own and several others.

The E10 is a paper tank Hetzer was developed at the same time as competitors planning to Jagdpanzer 38, but was never built due to the inovative and unproven technology. This tank was in the planning under the name Hetzer and should also heisen way. The Jagdpanzer 38 Hetzer got the name after the war.
He should be about 70 km / h to be fast, a Compact drive system with integrated gearbox and the hydraulic hydropneumatic suspension, which allowed a reduction in the tub on the floor. Armament as a remote controlled roof MG and a returnless 7.5 cm KWK was provided

I have all the e 10 built with the exception of the first, of aluminum scale 1:16 and the drive that it can as it was intended at the original lower it to the ground.

Here are some pictures of the construction and manufacture of the E-10 is also my company logo and avatar in forums.

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek
APAMOTEC Model technologie v detailu
Uživatelský avatar
PetrNC
PzKpfw VI - Tiger
PzKpfw VI - Tiger
Příspěvky: 1234
Registrován: 22 led 2012, 21:04
12
Lokalita: Náchodsko

Re: My avatar .... a E 10 Hetzer

Příspěvek od PetrNC »

Hi Edwin,

CNC milling it is your production?
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: My avatar .... a E 10 Hetzer

Příspěvek od Edwin »

Hi Petr,

Yes, with this CNC mill I work, but I do not only directly milled parts.
I build armor and gear drives.
APAMOTEC Model technologie v detailu
Uživatelský avatar
baca
PzKpfw V - Panther
PzKpfw V - Panther
Příspěvky: 676
Registrován: 12 bře 2010, 20:50
14
Lokalita: Ořechov

Re: My avatar .... a E 10 Hetzer

Příspěvek od baca »

Look it very,very good,i wish you good luck with your hobby job. cool
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: My avatar .... a E 10 Hetzer

Příspěvek od Edwin »

Thank you,

but it becomes more and more a real job. I am constantly on the further development and've got some projects and lots of ideas.
APAMOTEC Model technologie v detailu
Uživatelský avatar
PetrNC
PzKpfw VI - Tiger
PzKpfw VI - Tiger
Příspěvky: 1234
Registrován: 22 led 2012, 21:04
12
Lokalita: Náchodsko

Re: My avatar .... a E 10 Hetzer

Příspěvek od PetrNC »

Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: My avatar .... a E 10 Hetzer

Příspěvek od Edwin »

Here I have some pictures of my finished e 10

The tank is the way how it was planned on original fully lowered and the suspension also remains in operation.

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek

Obrázek
APAMOTEC Model technologie v detailu
Uživatelský avatar
Milan
PzKpfw VI - Tiger
PzKpfw VI - Tiger
Příspěvky: 2784
Registrován: 28 led 2009, 23:54
15
Lokalita: Cvrčovice,Brno-venkov

Re: My avatar .... a E 10 Hetzer

Příspěvek od Milan »

Nádhera.Krásná práce.Šikulka. :o :o :o
Odpovědět

Zpět na „Koncepty“