Can be a Coelian as he would have in 1946

Koncepty, prototypy, WOT, Panzerwaffe 46 atp.
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: Can be a Coelian as he would have in 1946

Příspěvek od Edwin »

Thank You payak7...... ahoj
APAMOTEC Model technologie v detailu
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: Can be a Coelian as he would have in 1946

Příspěvek od Edwin »

With a few little things I have done further.

Since my exhaust pipes I have not liked made ​​me new. In addition I have cut off a brass tube at a 45 ° angle and soldered with a lot of tin and smoothed.

Obrázek

So the Flammvernichter are now correct.

Obrázek

Obrázek

Since I was only in Asiatam, I have taken the front hatches and built into the Panther. In addition I have cut out the opening, filed and glued from below a plastic frame. So then I could stick the plate on this framework and have such a closed gap.

Obrázek

Obrázek

I must still refine a little, but as I now have two stable and functional hatches.
APAMOTEC Model technologie v detailu
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: Can be a Coelian as he would have in 1946

Příspěvek od Edwin »

I'm once again a little bit on my Coelian on.

First, I took care of the exhaust the ever so wobbled while driving. So I've drawn and printed the upper brackets, which is all the prophecies of doom perfectly applicable in defiance even in this scale. Now he keeps good and tight.

Obrázek

Obrázek

Obrázek

Da da worked so well I'm thinking on making even more so.

Then I have now started with the welds and this literally knitted with the hot needle.

Obrázek

Obrázek

Obrázek

How and where do I get this on the tower and the lower hull do I must still consider and even so I'm going to also look at some pictures to it.
APAMOTEC Model technologie v detailu
Uživatelský avatar
romann
PzKpfw IV
PzKpfw IV
Příspěvky: 499
Registrován: 03 čer 2012, 07:46
11
Lokalita: Nitra

Re: Can be a Coelian as he would have in 1946

Příspěvek od romann »

hallo
sehr gute arbeit
ist der gitter in dem flammentoter nich dick?versuche kuchen metallsieb fuer mehl oder tee benutzen
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: Can be a Coelian as he would have in 1946

Příspěvek od Edwin »

Hallo Romann,

diese bauteile zu drucken war einfach ein Versuch wie gut es möglich ist und das Gitter ist schon relativ fein geworden. In jedem Fall besser als ich es mir erhofft hatte.

Gruß Edwin
APAMOTEC Model technologie v detailu
Uživatelský avatar
Edwin
PzKpfw IV
PzKpfw IV
Příspěvky: 248
Registrován: 17 srp 2013, 22:21
10
Lokalita: Rheinland Pfalz Germany

Re: Can be a Coelian as he would have in 1946

Příspěvek od Edwin »

Since I usually come to nothing I could at least try a little further in 3D printing and me the debris guard and the battle space heating cover print.

Obrázek

Obrázek

What you can not see properly on the pictures is that I was able to print the grid in three dimensions and not just smooth sheets as there are those as-etched parts.

I am still not completely satisfied ..... there is one more thing ....
APAMOTEC Model technologie v detailu
Odpovědět

Zpět na „Koncepty“